>This is Pak / BV2SR
>I have FT-100 CW TONE very min problem and thermal can you
>tell me CW TONE ADJ MAX AND thermal modification ? so YAESU
>FT-100(EU TYPE) GENERL Frequency receive 100khz~970MHZ why
>my FT-100 working Frequency receive 100khz~961MHZ ???
>Please tell me FT-100 problem and modification.
VERTEX STANDARD CO., LTD.
Date: April 1, 2002
Dear Mr. Pak:
Thank you for your e-mail dated March 28, 2002, concerning the FT-100 transceiver.
Your inquiry has been forwarded to our Service Engineer, and the following comments were provided.
Please align the side tone level with VR-1004 on the MAIN unit. For your reference, we attach a file showing the location of VR-1004.
However, please be aware that any modifications are done at your own risk and we cannot accept responsibilities for any damages resulting.
We guarantee the RX frequency range within amateur bands only, and the outside bands are not guaranteed, as mentioned in the specifications.
If you have any further inquiries, we recommend you contact our distributor, TRUE-RED CO., LTD., at the following address. They are now responsible for your market and will be happy to help you now or anytime in the future.
TRUE-RED CO., LTD.
1F, No. 13, Alley 7
Lane 435, Sect. 3
Hoping East Road
Taipei, TAIWAN ROC
We hope this information proves helpful, and thank you for your patronage of Yaesu and Vertex Standard products.